Ruishi Drill bits +86-13731126075
HOME > PRODUCTS > Copper Conductor XLPE Power Cable > 3 Core Copper Conductor XLPE Insulated Power Cable
3 Core Copper Conductor XLPE Insulated Power Cable

3 Core Copper Conductor XLPE Insulated Power Cable


3 Core Copper Conductor XLPE Insulated Power Cable

XLPE power cable ,
armoured power cable,

We are professional wire & power cables manufacturer located Hebei Province,China.our company which is specializing in design, production and sales of many kinds XLPE cables ,such as XLPE insulated power cable, steel tape and steel wire armored power cable, low/medium/high voltage xlpe insulated power cable,copper and aluminium conductor xlpe power cable,pvc insulated power cable,aerial bundled cable,our power cable has been exported many countries,and won the love of customers with high quality products, reasonable prices, we hope to build long term business relation with different areas customers.

xlpe power cable

For PVC or XLPE insulated or transmission line without messenger or neutral conductor, the phase conductor may be AAC or AAAC or ACSR or Copper.  
For more than one core PVC or XLPE insulated aerial cable with or without messenger or neutral conductor and with or without street lighting conductor, the phase conductor and street lighting
conductor are AAC with PVC insulation, and the messenger or neutral conductor transmission line
is AAAC or ACSR with or without PVC(XLPE) insulation.
DIN VDE 0276 Part 620 -622
HD 620 S1  
Rated Voltage:  6/10kV, 6.35/11kV (12kV), 8.7/15kV, 12/20kV, 18/30kV,19/33kV
Core Number:  Single Core or Three Core (1C or 3C)
Available sectional area:  25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.

3 Core Copper Conductor XLPE Insulated Power Cable

1) conductor:
  Conductor:Stranded compacted circular copper or aluminium conductors according to IEC 60228 
class 2 / VDE 0276 class 2. VDE 0295 HD 383. All internal interstices of the conductor are filled with water
compound to prevent ingress of water through conductor during storage, handing, installation and 
of the cable
3 Core Copper Conductor XLPE Insulated Power Cable

2)   Conductor Screen:
The conductor screen consists of an extruded layer of non metallic, semi-conducting compound firmly bonded to the insulation to exclude all air voids. The screen has a 
minimum thickness
 of 0.3mm and the maximum volume resistivity of 500 Ohm-m at 90°C.

3) Insulation:
Insulation is of extruded XLPE compound type 2XI1 according to DIN VDE 0207 part 22 and HD 620.1 
with high 
degree of cross-linking, free from contaminants, air voids and heat resistant by dry cured process.
3 Core Copper Conductor XLPE Insulated Power Cable
4)Insulation Screen:
The insulation screen consists of extruded non metallic, semi-conducting compound extruded over the insulation. The extruded semi-conducting layer shall consist of bonded or cold strippable semi-conducting compound capable of removal for jointing or terminating. The minimum thickness is 0.3mm 
and the
 maximum volume resistivity of 500 Ohmm at 90°C. The screen is tightly fitted to the insulation to
 exclude all air 
voids and can be easily hand stripped on site.

3 Core Copper Conductor XLPE Insulated Power Cable

5)Conducting Water Blocking Layer:The insulation screen may be covered by semi- conductive water 
tape which will swell up under the influence of moisture of water to ensure longitudinal watertightness.
6)Metallic Screen: Copper tape screen or copper wire screen (CTS / CWS )
Copper wires are applied over the conducting water blocking layer with a minimum diameter of 0.5mm.
 And over the copper wires, copper tape with minimum thickness of 0.1mm is applied helically with 
overlap. Total cross section of metallic screen layer is shown in table 2. The screen can withstand of
 fault current to earth of 1000 A for one second at maximum temperature of 160°C. Minimum cross
 section of concentric conductor is according to DIN VDE 0273 & 0276 as shown.
7)Separator / Water Blocking Layer:
The metallic screen may be covered by non-conducting water blocking tape which will swell up under the influence of moisture of water to ensure
3 Core Copper Conductor XLPE Insulated Power Cable
8)Separation Sheath (for armoured cable):
The separation sheath comprises a layer of extruded PVC, PE or LSZH, applied under the armour. 
9)Armour(for armoured cable): The armour consists of:  Single Core: Aluminium Wire Armoured (AWA)
Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA) 
(1) Double layers of galvanized steel tape are applied helically with proper inner overlapping over an 
separation sheath. 
(2) Galvanized flat steel wires with thickness of 0.8 mm are applied helically over the surface of inner 
sheath with 
minimum of 90% coverage. And galvanized Steel tape with nominal thickness of 0.3 mm is applied
 helically with 50% coverage to cover the surface of the flat wires.
10)Outer Sheath:
Overall sheath comprises a layer of extruded PE compound DMP2 according to HD620.1 and 2YM3 type
 to DIN

Products model:
 vv, vv22,YJV, YJV22
1, 1-5 Cores pure copper conductor
2. Pvc insulated, with or without steel armor, pvc shielded
3. High quality, ISO 9001, CCC, CE, ROHS certified
4. OEM is available.
1. Standard
XLPE Power Cable will be produced as per Chinese National Standard GB/T12706.2-12706.3 equivalent to IEC 60502
2. Application
This product is suitable for using in rated voltage from 6/6kV to 26/35kV system transmission and distribution lines. Based on different sheath structures, it can be used for laying in the air and underground.
3. Description and Installation Place

Description Installation Place  
XLPE Insulated, PVC Sheathed Power Cable Laid in indoor, outdoor, tunnels, cable canals, reinforced concrete pipelines and loose soil. Cable should not bear outer mechanic force, but can bear a certain tractional force.  
XLPE Insulated, Steel Tape Armored and PVC Sheathed Power Cable. Laid underground. Cable can bear outer mechanic force, but should not bear large tractional force.  
XLPE Insulated ,fine Steel Wire Armored and PVC Sheathed Power Cable Laid in indoor, tunnels and mines. Cable can bear outer mechanic force and fairly large tractional force.  
XLPE Insulated, thick Steel Wire Armored and PVC Sheathed Power Cable. Laid in vertical section, indoor, tunnels and mines. Cable can bear outer mechanic force and very large tractional force.  

we are one of top electric cable manufacture in north of china,main product include xlpe power cable,armoured cable,swa cable,single core cable,2 3 4 core armoured cable.

Copyright ©2016 XLPE power cable site map site map html
Links: XLPE insulated power cable - XLPE cable - armoured power cable - 3 core armoured cable - 4 core armoured cable - xlpe insulated cable - Copper Conductor XLPE Power Cable - armoured power cable - overhead cables - XLPE swa pvc cable - aerial bundled cable - PVC insulated cable - CU/XLPE/SWA/PVC Cable - 11kv xlpe power cable - lower voltage power cable - 33kv xlpe power cable - medium voltage xlpe power cable - rubber welding cable - rubber cables - rubber seal strip - rubber welding cables - epdm seal strip - non woven bag - pp woven bag -


Your name