Ruishi Drill bits
sales@xlpepowercable.com +86-13731126075
HOME > PRODUCTS > Steel Wire Armoured Power Cable > SWA Armoured XLPE Cable
SWA Armoured XLPE Cable

SWA Armoured XLPE Cable

Details

SWA Armoured XLPE Cable


Keywords:

xlpe power cable,
xlpe armoured power cable,
SWA Armoured XLPE Cable,
steel wire armoured power cable,

Introduction:
The products can be produced according to our factory specification which is equivalent to the standard IEC60502. The factory can also design and manufacture special XLPE power cable according to the other standards required by the customers. They not only have excellent electric, mechanical properties, but also have powerful resistance against chemical corrosion, heataging and environmental stress. Their structures are simple. The permissible maximum operating temperature is 90C. It is convenient for using, and they can be laid with no restriction of different elevation.
xlpe power cable

SWA Armoured XLPE Cable - Application:

It is used to transmit and distribute power in power transmission and distribution system of 1kV. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

 

SWA Armoured XLPE Cable - Using features:

1. Rated voltage: Uo/U:3.6/6kV, 6/10kV(11kV), 12/20kV(24kV), 19/33kV, 26/35kV(35kV).

2. No. of core: Single core or three cores.

3. The highest allowed operating temperature of conductor for long-term working is 90oC. In short-circuit (Max. long-term is no more than 5 seconds). The highest temperature for conductor is no more than 250oC.

4. D.C. resistance of the conductor complies with the stipulations of 3.6/6kV, 6/10kV(11kV), 12/20kV(24kV), 19/33kV, 26/35kV(35kV).

5. The environment temperature should be no lower than 0oC when lay. Otherwise it should be preheated.

6. The cable is laid without horizontal drop limit.

7. Working Frequency Voltage Test: 3.5Uo/5min without puncture.

8. Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable.


SWA Armoured XLPE Cable
 

XLPE Insualted PVC Sheathed Steel Wire Amoured High Voltage Cable with Copper or Aluminum Conductor.
 

Prief intruduce:

Voltage  Rate

3.6/6KV, 6/6KV, 6/10KV, 8.7/10KV, 8.7/15KV, 12/20KV, 18/20KV,

18/30KV, 21/35KV, 26/35KV

Cores

1C, 3C

Range of Nominal

cross section:

Single core:25 mm2 ~ 630 mm2

3 cores: 25 mm2 ~ 400 mm2

Application

It applies to the transmission and distribution lines with rated voltage

from 3.6/6KV to 26/35KV, to be laid directly in ground, outdoors, indoors

and in cable ducts.

Standard

IEC60502, BS6622, VDE0276, GB/T12706

Constructions

Conductor: Class 2 annealed copper strands

Core shield: semi-conducting compound + copper tape metallic screen

Insulation: XLPE

Sheath: PVC


 

we are one of top electric cable manufacture in north of china,main product include xlpe power cable,armoured cable,swa cable,single core cable,2 3 4 core armoured cable.

Copyright ©2016 XLPE power cable site map site map html
Links: XLPE insulated power cable - XLPE cable - armoured power cable - 3 core armoured cable - 4 core armoured cable - xlpe insulated cable - Copper Conductor XLPE Power Cable - armoured power cable - overhead cables - XLPE swa pvc cable - aerial bundled cable - PVC insulated cable - CU/XLPE/SWA/PVC Cable - 11kv xlpe power cable - lower voltage power cable - 33kv xlpe power cable - medium voltage xlpe power cable - rubber welding cable - rubber cables - rubber seal strip - rubber welding cables - epdm seal strip - non woven bag - pp woven bag -

ASK FOR QUOTE

Your name

Email

Message